Default User Id And Passcode; Status; General; Trays - Xerox WorkCentre 5230A System Administration Manual

7 CentreWare Internet Services
Category Name
Support

Default User ID and Passcode

If the System Administration mode is enabled in CentreWare Internet Services settings,
you will be prompted to enter the System Administrator user ID and passcode when
some changes are made. The default user ID and passcode for the System
Administrator are "11111" and "x-admin", respectively. This ID and passcode are the
default, and can be changed by the System Administrator.

Status

The [Status] tab allows you to check the status of the paper trays, output trays, and
consumables of the machine.
NOTE: The details displayed may differ from those shown on the machine's touch
screen.
Follow the steps below to select features available on the [Status] tab.
1.
Click [Status] on the Header Panel on the home page.
2.
Click the required feature on the collapsible menu of the menu panel.

General

This page displays the machine information, IP address, and status. It also displays the
[Refresh] and [Reboot Machine] buttons. Click the [Refresh] button to display the latest
information.

Trays

This page displays the status of the paper tray and output tray.
Paper Supply
Trays
Lists the available paper trays: Tray 1, Tray 2, Tray 3 (optional), Tray 4 (optional), Tray
5 (Bypass), and Tray 6 (optional).
NOTE: The trays displayed depend on the machine configuration.
Status
Displays the status of each tray as [Ready], [Empty], [Not Available], or [Unknown].
NOTE: When the machine is in the Energy Saver mode, the status may be displayed
as [Unknown].
% Full
Displays the percentage of paper remaining in each tray in 25% increments.
156
• System Administrator
• Xerox Support
Services