C Option - Xerox WorkCentre 5230A System Administration Manual

• To display a printer named fxPS in long format, enter the following command:

-C Option

On SunOS, the -C option can be used to specify the print format if the machine prints
with the PostScript language in spool mode.
This section explains the functions which can be specified and printing operations
which will be affected using the -C option.
NOTE: When the PostScript logical printer that was configured using CentreWare
Internet Services and the -C option have been specified simultaneously, some of the
actions cannot be guaranteed to work. Also, when specifying the PostScript logical
printer as a default printer on UNIX, it is recommended not to use the -C option.
Function
The following items can be set up using the -C option.
Selecting a paper tray
When selecting a paper tray, specify either a paper size or a tray. If the paper size is
specified, the machine automatically searches and selects the tray.
The following parameters can be specified.
INTRAY1/intray1
INTRAY2/intray2
INTRAY3/intray3
INTRAY4/intray4
INTRAY5/intray5
INMF/inmf
A3/a3
B4/b4
A4/a4
B5/b5
A5/a5
LETTER/letter
LEGAL/legal
INHC/inhc
%lpq -PfxPS -l
Parameter
Selects Tray 1.
Selects Tray 2.
Selects Tray 3.
Selects Tray 4.
Selects Tray 5 (Bypass).
Selects Tray 5 (Bypass).
Selects the tray which has A3 (297 × 420 mm/11.7 × 16.5
inches) paper loaded.
Selects the tray which has B4 (257 × 364 mm/10.1 × 14.3
inches) paper loaded.
Selects the tray which has A4 (210 × 297 mm/8.3 × 11.7
inches) paper loaded.
Selects the tray which has B5 (182 × 257 mm/7.2 × 10.1
inches) paper loaded.
Selects the tray which has A5 (148 × 210 mm/5.8 × 8.3
inches) paper loaded.
Selects the tray which has letter size (216 × 279 mm/8.5 ×
11.0 inches) paper loaded.
Selects the tray which has legal size (216 × 356 mm/8.5 ×
14.0 inches) paper loaded.
Selects the High Capacity Tray.
UNIX TCP/IP
Description
253