Bonjour - Xerox WorkCentre 5230A System Administration Manual

Xerox print, copy, scan, fax, email system administration guide
Hide thumbs Also See for WorkCentre 5230A:
Table of Contents

Advertisement

15 Problem Solving
Restrictions
This section explains the restrictions that apply while using EtherTalk.
Machine Name
The machine name recognized by the client cannot have duplicates on the network. If
another machine on the network has the same machine name, the machine name is
changed automatically when the machine starts.
- Name Change Rules
The machine name is changed as follows:
• When the machine name is 31 characters or less in length
A numeral is appended to the end of the machine name. If another machine on the
network still has the same name as the machine, the numeral is incremented.
• When the machine name is 32 characters in length
The last character in the machine name is replaced with a numeral. If another
machine on the network still has the same name as the machine, the numeral is
incremented.
If the [Protocol Settings] in the [Properties] tab of CentreWare Internet Services is
accessed after the machine is initialized with a changed name, the old machine name
is displayed. However, the changed machine name is registered on the network, and
the client can access the machine using the new machine name. If the machine is
switched off and on again after the machine name is changed, the machine attempts
to start with the changed machine name. At this point, if there is another machine on
the network with the same name, the machine name is changed following the rules
above.
It is recommended that all machines on the network be setup with unique machine
names.
Zone Name
The zone name can be set using the [Protocol Settings] in the [Properties] tab of
CentreWare Internet Services. However, if the assigned zone name does not exist on
the network connected to the machine, the zone name is changed to the default zone
name. When setting the zone name, make sure that the zone name exists on the
network connected to the machine.

Bonjour

This section explains the restrictions for Bonjour.
Restrictions
Bonjour operating environment
Bonjour can be used on Macintosh computers running Mac OS X 10.2 or later using
the Printer Setup Utility or Safari. The Bonjour discovery function is enabled on the
same subnet.
Machine Name
• If the machine name or host name settings are changed, print jobs may be printed
on printers other than the specified printer.
382

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents