16 Appendix; Specifications; Machine Specifications - Xerox WorkCentre 5230A System Administration Manual

16 Appendix

This chapter describes the machine specifications, emulation parameters supported on
the machine, how to upgrade the machine software, and how to configure Xerox
Extensible Interface Platform.
Specifications – page 431
Emulation Parameters – page 437
Machine Software Upgrade – page 440
Xerox Extensible Interface Platform (XEIP) – page 441

Specifications

Use the specifications listed below to identify the capabilities of the machine. The
machine adheres to strict specifications, approvals and certifications. These
specifications are designed to provide for the safety of users and to ensure that the
machine operates in a fully functional state. Note that improvements in specifications
and the appearance of the product may be made without prior notice.
For more information on the specifications, contact your Xerox Representative.

Machine Specifications

Machine Size (Standard Configuration)
With the Document Feeder and Tray 5 (Bypass):
(W × D × H) 640 × 650 × 832 mm (25.2 x 25.7 x 32.8 inches).
With the Document Glass Cover and Tray 5 (Bypass):
(W × D × H) 640 × 652 × 751 mm (25.2 x 25.7 x 29.6 inches).
Space Requirements
(W × D) 1,340 × 1,185 mm (52.8 × 46.7 inches)
With the Office Finisher LX: (W × D) 2,140 × 1,187 mm (84.3 × 46.7 inches)
NOTE: For installations in a walkway, add an additional 610 mm (24.0 inches).
Machine Weight
WorkCentre with the Document Glass Cover: 64.0 kg (140.8 lb)*
* Including the interface cable, the Duplex unit, and the Exit 2 unit (model-A)
Copier Speed
From Tray 1 / 1 sided:
WorkCentre 5222
A4/8.5 x 11" LEF: 23 cpm (cycles per minute) (1 sided)
A4/8.5 x 11" LEF: 23 cpm (cycles per minute) (2 sided)
A3/11 × 17" SEF: 13 cpm (cycles per minute) (1 sided)
A3/11 × 17" SEF: 8 cpm (cycles per minute) (2 sided)
431