Xerox WorkCentre 5230A System Administration Manual page 425

Code
036-788 The polling feature was to be used, but the target machine did not store the
036-789 documents to be polled. Check the target machine, and try again.
036-790 Communication failed due to an invalid request. Check the procedure in the
036-791 User Guide and perform the operation again.
036-792 Refer to 034-508.
036-793
036-795 The remote copy function (to make multiple copies of a received document) is
not supported on the destination machine. Check if the remote copy function is
supported on the destination machine.
036-796 The general fax mode was used, because the remote copy function (to make
multiple copies of a received fax document) was not supported on the
destination machine.
036-797 Refer to 034-508.
036-798
036-799
041-210 An error occurred in the tray module. Switch off the machine, and then switch it
041-211 on again. Contact the Xerox Welcome Center if the problem persists.
047-211 A hardware problem occurred in the paper output assembly. Switch off the
machine, and then switch it on again. Contact the Xerox Welcome Center if the
problem persists.
047-212 An error occurred in the Offset Stacking Module. Switch off the machine, and
then switch it on again. Contact the Xerox Welcome Center if the problem
persists.
047-213 An error occurred in the Finisher. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
047-214 An error occurred in the Duplex Module. Switch off the machine, and then switch
it on again. Contact the Xerox Welcome Center if the problem persists.
047-215 A communication error occurred between the main unit and the Exit Module.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
047-216 An error occurred in the Finisher. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
047-217 A communication error occurred between the main unit and the High Capacity
Feeder. Switch off the machine, and then switch it on again. Contact the Xerox
Welcome Center if the problem persists.
047-218 A communication error occurred between the main unit, and the Two Tray
Module or the High Capacity Tandem Tray. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
062-210 The document feeder malfunctioned. Contact the Xerox Welcome Center.
062-211 An error occurred in the document feeder. Contact the Xerox Welcome Center.
062-277 A communication error occurred between the scanner and the feeder. Contact
the Xerox Welcome Center.
062-394 Data could not be written in memory space. Switch off the machine, and then
switch it on again.
Description and Remedy
Fault Codes
425