Xerox WorkCentre 5230A System Administration Manual page 195

Xerox print, copy, scan, fax, email system administration guide
Hide thumbs Also See for WorkCentre 5230A:
Table of Contents

Advertisement

Feature
Connectivity
Protocols
(continued)
Setting items
Microsoft Networking (continued)
• Primary Server IP Address & Port – Displays the
primary server WINS IP address when [Obtain
WINS Server Address Automatically] is disabled.
Change the address as necessary.
• Secondary Server IP Address & Port – Displays the
secondary server WINS IP address when [Obtain
WINS Server Address Automatically] is disabled.
Change the address as necessary.
LPD
Allows you to configure the LPD protocol settings.
Protocol – Displays whether the protocol is enabled or
disabled.
Physical Connection – Displays "Ethernet".
Port Number – Enter the port number within the range
of 1 to 65535.
TBCP Filter – Select the check box to enable TBCP
Filter when processing PostScript data. This is
available only when the optional PostScript kit is
installed. When the transmission data includes binary
or EPS data, disable this feature.
Connection Time-Out – Allows you to specify the
connection time-out period when transmission fails.
Maximum Number of Sessions – Enter the maximum
number of sessions.
Port 9100
General:
• Protocol – Displays whether the protocol is enabled
or disabled.
• Physical Connection – Displays "Ethernet". This is a
display-only item.
Port Information:
• TCP Port Number – Enter the port number for Port
9100.
• Bidirectional – Displays whether the bidirectional
communication is enabled or disabled.
• Maximum Connections per Port – Displays "8". This
is a display-only item.
• End of Job Timeout – Allows you to specify the
connection time-out period when transmission fails.
• PDL Switching – Displays whether the PDL
Switching feature is enabled or disabled. This is a
display-only item.
• TBCP Filter – Select the check box to enable TBCP
Filter when processing PostScript data. This is
available only when the optional PostScript kit is
installed. When the transmission data includes
binary or EPS data, disable this feature.
Properties
195

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents