Properties; Default User Id And Password - Xerox WorkCentre 7132 User Manual

Properties

This page allows you to view and set the machine properties. These include the
machine details and configuration, the CentreWare Internet Services settings, the port
settings, protocol settings, emulation settings, and the memory settings. The items
displayed will depend on the model and configuration of the machine.
NOTE: Some settings with data entry use bytes as units of data volume. Each
character that you enter is one byte.
1.
Click [Properties] on the Main Panel on the home page.
2.
Select an item from the collapsible menu on the Menu Panel. To select an item in
the [Billing & Counters], [PKI Settings], [Remote Authentication Server/Directory
Service], [Port Settings], [Protocol Settings], or [Emulation Settings] folder, click
"+" on the left of the folder to open the item.
3.
To change settings, use the drop-down list box, text boxes, and check boxes on
the page.
The default settings in the drop-down list box are indicated with an asterisk (*).
4.
After changes have been made, click [Apply].
• To cancel any changes you have made, click [Undo].
• To display the current machine settings, click [Refresh].
NOTE: Some settings will be available only after you restart CentreWare Internet
Services or after the machine is switched off and on.

Default User ID and Password

If the System Administrator mode is enabled in CentreWare Internet Services settings,
you will be prompted to enter the System Administrator user ID and password when
changes are made. The default user ID and password for the System Administrator are
"11111" and "x-admin", respectively. This ID and Password are default, and can be
changed by the System Administrator.
Xerox WorkCentre 7132 User Guide
Properties
179