Xerox WorkCentre 5230A System Administration Manual page 418

15 Problem Solving
Code
027-733
027-734
027-735
027-736
027-737
027-739
027-740
027-741
027-742
027-743
027-744
027-745
027-746
027-750
027-751
027-752
027-753
027-754
418
A Job Template server SSL error occurred. Check if the SSL is enabled on the
server.
The job template certificate may have a problem. Check if your computer is
connected to the HTTP server via the HTTP protocol. Also check if a valid SSL
server certificate for the HTTP server is registered on the machine. If the device
certificate is not registered on the Job Template server, disable the SSL
certificate verification setting.
Data was to be transferred with SSL, but the SSL was disabled on the machine.
Enable the SSL, or use the HTTP protocol.
A server certificate verification error occurred. Enable the server certificate
verification setting on the machine.
An error occurred during reading of data from the job template server. Check the
access rights of the directory in which the job template is stored.
Unable to find the specified job template server. Check the path to the job
template server.
Unable to log in to the job template server. Verify that the correct user login
name, password and other information are entered.
Unable to connect to the job template server. Ask the network administrator to
check the network or server.
The job template could not be stored into memory due to insufficient disk space.
Delete unnecessary data from the disk.
The settings on the job template server are incorrect. Check the settings of the
job template server.
There is a problem in the domain name of the job template server. Check the
connection to the server. Also check if the domain name is registered on the
DNS server.
The address of the DNS server is not registered on the machine. Register the
address of the DNS server on the machine, or directly specify the job template
server with its IP address.
The protocol setting of the job template server is not correct. Set up the correct
port.
Fax forwarding or printing, or Internet Fax forwarding was attempted for a
scanned document. Fax forwarding and printing, and Internet Fax forwarding
cannot be performed for scanned documents.
An error occurred while a job flow sheet is being processed. Check the job flow
sheet.
The job flow sheet has a parameter that requires user input.
Take one of the following actions:
• Link the mailbox with a job flow sheet that does not require user input.
• Set the default value for the parameter on the job flow sheet.
The required port is not activated. Activate the port.
XPS or PDF Signature settings written in the job flow sheet are invalid. Check
the XPS or PDF Signature settings both on the machine settings and on the job
flow sheet. If the settings are not the same, change either of them.
Description and Remedy