Xerox WorkCentre 5230A System Administration Manual page 222

7 CentreWare Internet Services
Security
222
Feature
Create
Authorization
Groups
Remote
Authentication
Servers
Setting items
Create Authorization Groups
Allows you to create authorization groups to assign to
users. Up to 20 groups can be created including the
Default Group.
Edit – Displays the [Authorization Setup] page for a
group number.
Authorization Setup
Allows you to configure settings for a group.
• Group Name – Enter a group name of up to 32
characters.
• Restrict Recipient Selection Method – Specifies
whether or not to permit group members to specify
recipients using the keyboard screen and buttons on
the control panel, when the [Restrict Recipient
Selection Method] setting is set to [Only From
Address Book].
• Restrict User to Edit Address Book – Specifies
whether or not to permit group members to edit
Address Book, when the [Restrict User to Edit
Address Book] setting is set to [Yes].
• Allow User to Disable Active Settings – Specifies
whether or not to permit group members to disable
the Watermark feature during a user session, when
[Allow User to Disable Active Settings] is set to
[Enable Active Settings].
• When Protection Code Is Detected – Specifies what
to do if a protection code is detected in a job from a
user in this group.
Authentication System
• Authentication System Settings – Allows you to
select the remote authentication method to use.
• Server Response Time-Out – Specifies the time-out
value for connection to the server.
• Search Time-Out – Specifies the time-out value for
search on the server.
• Use User Principal Name (UPN) Format – Specifies
whether or not to use the User Principal Name
format for user names.
Kerberos Server
Allows you to configure Kerberos servers 1 to 5.
Primary Server Name/IP Address – Enter the server
name or IP address of the primary server.
Primary Server Port Number – Enter the port number
of the primary server.
Secondary Server Name/IP Address – Enter the server
name or IP address of the secondary server.
Secondary Server Port Number – Enter the port
number of the secondary server.
Domain Name – Specify a domain name.