Xerox WorkCentre 5230A System Administration Manual page 193

Feature
Connectivity Protocols
(continued)
Setting items
SNMP Configuration (continued)
Advanced – Displays a page that contains the [Add
UDP IPv4], [Add UDP IPv6 Address], [Add IPX
Address], and [Delete] buttons.
• Add UDP IPv4 Address – This button displays the
[SNMP Configuration - IPv4] page, which allows you
to set the following settings.
IP Trap Destination Address:
- IP Address: Enter the IPv4 address of the SNMP
agent that you are setting up to receive traps.
- UDP Port Number: Enter the UDP port number of
the SNMP agent.
- SNMP Version: Select the SNMP version of the
SNMP agent.
Traps:
- TRAP Community Name: Enter the trap community
name of the SNMP agent.
- Trap to be Received: Select the types of traps to
receive from the SNMP agent.
• Add UDP IPv6 Address – This button displays the
[SNMP Configuration - IPv6] page, which allows you
to set the following settings.
IP Trap Destination Address:
- IP Address: Enter the IPv6 address of the SNMP
agent that you are setting up to receive traps.
- UDP Port Number: Enter the UDP port number of
the SNMP agent.
- SNMP Version: Select the SNMP version of the
SNMP agent.
Traps:
- TRAP Community Name: Enter the trap community
name of the SNMP agent.
- Trap to be Received: Select the types of traps to
receive from the SNMP agent.
• Add IPX Address – This button displays a page that
allows you to set the following settings.
IPX Trap Destination Address:
- IPX External Network Number: Enter the IPX
external network number of the SNMP agent that
you are setting up to receive traps.
- Physical MAC Address: Enter the physical MAC
address of the SNMP agent.
- IPX Socket Number: Enter the IPX socket number
of the SNMP agent.
- SNMP Version: Select the SNMP version of the
SNMP agent.
Traps:
- TRAP Community Name: Enter the trap community
name of the SNMP agent.
- Trap to be Received: Select the types of traps to
receive from the SNMP agent.
Properties
193