Xerox WorkCentre 5230A System Administration Manual page 221

Feature
Security Authentication
Configuration
User Details
Setup
Setting items
Authentication Configuration
For details on each item, refer to
Configuration on page 217
Device Default State Configuration
For details on each item, refer to
Configuration on page 217
Allows you to configure the settings for user ID
authentication. The items displayed on this page vary
depending on the authentication method being
selected.
Alternative Name for User ID
Enter a name you want to display on the machine's
touch screen and CentreWare Internet Services, or to
print on reports, instead of the user name. This name
can be up to 15 characters long.
Mask User ID (***)
Specify whether or not to hide user IDs behind
asterisks when entered.
Alternative Name for Account ID
Enter a name you want to display on the machine's
touch screen and CentreWare Internet Services, or to
print on reports, instead of the account ID. This name
can be up to 15 characters long.
Mask Account ID (***)
Specify whether or not to hide account IDs behind
asterisks when entered.
Failed Access Log
Allows you to specify the number of authentication
failures within a certain period before the attempt is
logged as an error.
Store User Details
Specify whether to store user details in the machine's
hard disk or nonvolatile memory.
Remote Login User ID
Specify whether to distinguish lower case and upper
case letters in user IDs for remote authentication.
User ID for Login
Specify whether or not to make the User ID text box
case-sensitive when a user ID is authenticated by the
remote server.
Minimum Passcode Length
Specify the minimum number of digits allowed for a
passcode.
Properties
Accounting
.
Device Default State
.
221