Xerox WorkCentre 5230A System Administration Manual page 174

7 CentreWare Internet Services
Edit Job Flow Sheet
Create Job Flow
Sheet
Job Flow Sheets Common Attributes
The following table shows the information fields on the [Job Flow Sheets Common
Attributes] page.
Job Flow Sheet Name
Description
Job Flow
Total Destinations
Sheet Type
Keyword
Edit Job
Flow
Sheet
Print
The following table shows the information fields on the [Print] page.
Job Flow Sheet Name
Paper Supply
Output Destination
Quantity
2 Sided Printing
Staple
Hole Punch
174
Displays the [Job Flow Sheets Common Attributes] page where
you can edit the selected job flow sheet.
NOTE: This button becomes active only when logged in as the
System Administrator.
Displays the [Job Flow Sheets Common Attributes] page where
you can create a new job flow sheet.
NOTE: This button becomes active only when logged in as the
System Administrator.
Enter or change the name of the selected job flow sheet.
Enter or change the description of the job flow sheet.
Displays the type of command set for the job flow sheet.
Displays the number of destinations defined in the job flow sheet.
Displays the access type ([Personal] or [Shared]) of the job flow
sheet. This item is displayed only when the Authentication feature
is enabled.
Enter a keyword to be used when searching the job flow sheet.
The keyword can be up to 12 characters.
Edit Select a command to assign to the job flow sheet from [Print],
Destination [Send as Fax], [Send as Internet Fax], [Send as E-mail], [FTP
Transfer], or [SMB Transfer]. Then click the [Edit Job Flow Sheet]
button to display a page where you can configure the selected job
flow sheet command.
Displays the name of the job flow sheet.
Select the paper tray for the job flow sheet.
Select the output paper tray.
Specify the number of printouts.
Select 1 sided or 2 sided output.
Specify the staple position and the number of places to staple.
Specify the hole-punch position and the number of holes to
punch.