User Details Setup - Xerox WorkCentre 5230A System Administration Manual
Xerox print, copy, scan, fax, email system administration guide
Hide thumbs
Also See for WorkCentre 5230A:
- Brochure & specs (4 pages) ,
- Supplementary manual (30 pages) ,
- Quick network setup manual (4 pages)
Table of Contents
Advertisement
NOTE: For information on [Restrict User to Edit Address Book], refer to
to Edit Address Book on page 84
Allow user to disable active settings
Specifies whether to permit the group members to disable the Watermark feature
during their user session, when [Allow User to Disable Active Settings] in
[Authentication/Security Settings] is set to [Enable Active Settings].
NOTE: For information on [Allow User to Disable Active Settings], refer to
to Disable Active Settings on page 145
User Details Setup
This feature allows you to configure the settings for user ID authentication. The setting
items displayed on the screen depend on what authentication type you have selected
under [Login Type] in [Authentication].
1.
Select [User Details Setup] in
the [Features] menu.
2.
Configure the required settings.
3.
Select [Save].
Alternative Name for User ID
Displays a keyboard screen. Enter an alternative name for the user ID, which is to be
displayed on the touch screen and in CentreWare Internet Services, and is to be printed
on reports. The name can be up to 15 characters long.
Mask User ID (***)
Specifies whether to display a user ID, or hide it with asterisks on a screen.
Failed Access Log
Displays the [Failed Access Log] screen. This feature allows you to specify the number
of authentication failures within a certain period before the attempt is logged as an
error.
1.
Select [Failed Access Log] on
the [User Details Setup] screen.
2.
Select [On] to enable the
feature.
• Failed Attempts - Enter the maximum number of authentication failures to be
allowed using the numeric keypad on the control panel.
Display Login Status
Specifies whether to display login status of the user on the upper-right corner of the
login screen. Select [Enabled] to display, or [Disabled] to hide login status.
Logout Confirmation Screen
Specifies whether to display a logout confirmation screen every time a user session is
to be ended using the <Log In/Out> button.
.
.
Authentication/Security Settings
Restrict User
Allow User
143
Hide quick links:
Advertisement
Table of Contents
