Screen Messages - Xerox WorkCentre 5230A System Administration Manual

15 Problem Solving
Code
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
133-226
133-280
133-281
133-282
133-283
133-700
133-710
134-210
134-211

Screen Messages

Along with fault codes, the following messages are displayed on the touch screen on
some occasions.
A fault has occurred.
Switch off the machine. Ensure that the
screen disappears before switching it on.
If the problem persists, call for service.
A fault has occurred. The machine has
rebooted. If the problem persists, call for
service.
Processing has been cancelled due to an
error.
See User Guide for information on fault code.
428
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The specified country code is not supported. Contact the Xerox Welcome
Center.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The staple/punch settings were cancelled. Specify appropriate staple/punch
positions.
The received fax data was printed using Tray 5 (Bypass), as the selected tray
was not available for fax printing.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
Message
Description and Remedy
Description and Remedy
A fault has occurred. Switch off the machine
and wait until the touch screen is completely
off, and then restart the machine. If the
problem persists, write down the fault code
(xxx-yyy) displayed on the screen. Switch off
the machine and contact the Xerox Welcome
Center.
The machine was restarted due to a fault.
Resume normal operations. If the problem
persists, contact the Xerox Welcome Center.
The machine operation has stopped due to a
fault. Restart the job.