15 Problem Solving
Code
033-721
033-722
033-724
033-725
033-726
033-727
033-728
033-731
033-733
033-734
033-735
033-736
033-737
033-738
033-740
033-741
033-742
033-743
033-744
033-745
033-746
033-747
033-749
033-750
420
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The scan job was cancelled. The document is jammed inside the machine, or
the number of scanned pages has reached the limit value. If the problem is a
document jam, clear the jam first. Reload only the document pages that have
not been scanned, and press the <Start> button to continue the job.
Unable to receive the image data, because the data size that can be received
per a fax transmission exceeds its upper limit. Request the sender to divide the
document into smaller segments to send, or lower the resolution. If the problem
persists, check if memory is installed correctly. If the problem persists, contact
the Xerox Welcome Center.
The hard disk is full. Delete unnecessary data on the hard disk to increase the
available hard disk space.
The received document was printed single sided. The 2-sided printing feature is
not available for a mixed size document.
The orientation of the received pages could not be changed, because the data
size was too large. They were printed without rotation.
The Auto Print formatting of the received fax document was interrupted by a
manual print operation. No user action is required. The machine will
automatically resume the Auto Print job after the manual printing is done.
The Auto Print processing for the received fax document was interrupted by a
manual print operation. No user action is required.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
Fax printing was suspended, because a job report was generated while the fax
print job was being prepared. No user action is required.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The transmission was cancelled, because the data size exceeded its upper limit.
A fax error occurred. Perform the same operation again.
Abnormal JBIG image data was received. No user action is required.
The print job for the received fax document was cancelled. No user action is
required.
A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The job was suspended. No user action is required.
The machine rectified a memory problem automatically for printout. No user
action is required.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
Description and Remedy