System Administrator Settings; System Administrator's Login Id; System Administrator's Passcode; Authentication - Xerox WorkCentre 5230A System Administration Manual

6 Setups

System Administrator Settings

This section describes the features that allow you to change the System Administrator's
login ID and passcode. The machine enters the System Administration mode only
when a correct System Administrator login ID is entered. Before shipment, the default
System Administrator login ID is set to "11111". For more information, refer to the
following:
System Administrator's Login ID – page 140
System Administrator's Passcode – page 140
1.
Select [Authentication/Security
Settings], and then select
[System Administrator Settings]
in the [Group] menu.

System Administrator's Login ID

This feature allows you to change the default System Administrator's Login ID.
Program a new ID between 1 and 32 alphanumeric characters.
1.
Select [System Administrator
Login ID] in the [Features]
menu.
2.
Select [On].
3.
Touch [Keyboard], and then use
the screen keyboard or the numeric keypad on the control panel to enter a new
System Administrator ID.
4.
Select [Close] to close the keyboard screen.
5.
Repeat steps 3 and 4, to enter the same System Administrator ID.
6.
Select [Save].

System Administrator's Passcode

This feature allows you to change the default System Administrator passcode. Program
a new passcode between 4 and 12 alphanumeric characters including spaces.
1.
Select [System Administrator's
Passcode] in the [Features]
menu.
2.
Touch [Keyboard], and then use
the screen keyboard or the
numeric keypad on the control
panel to enter a new System Administrator passcode.
3.
Select [Close] to close the keyboard screen.
4.
Repeat steps 2 and 3, to enter the same System Administrator passcode.
5.
Select [Save].

Authentication

This section describes the settings related to user authentication.
140