Xerox WorkCentre 5230A System Administration Manual page 426

15 Problem Solving
Code
062-790
071-210
071-211
072-210
072-211
073-210
073-211
074-210
074-211
077-211
077-215
078-210
078-211
078-212
078-213
078-214
078-250
081-799
112-700
116-220
116-392
116-701
116-702
116-703
116-713
426
The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter in the User Guide, to verify the types of documents
that can be copied.
An error occurred when Tray 1 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
An error occurred when Tray 2 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
An error occurred when Tray 3 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
An error occurred when Tray 4 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
An error occurred with the Two Tray Module or the High Capacity Tandem Tray.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
An error occurred when the Two Tray Module was used. Switch off the machine,
and then switch it on again. Contact the Xerox Welcome Center if the problem
persists.
An error occurred when Tray 1 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
An error occurred when Tray 2 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
Tray 5 (Bypass) malfunctioned. Switch off the machine, and then switch it on
again. If the problem persists, contact the Xerox Welcome Center.
An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
The e-mail to fax job was cancelled. The fax destination may be incorrect.
Check the number, and try again.
The hole punch waste container is full. Empty the container.
For information on how to empty the hole punch waste container, refer to
Emptying the Hole Punch Waste Container (Optional) on page 37
The machine failed to move onto the Download mode. Contact the Xerox
Welcome Center.
The Printer or PostScript kit is attached to an improper slot on the controller
board. Attach the Printer or PostScript kit to the correct slot.
Unable to print double-sided due to insufficient memory. Check if memory is
installed correctly. If the problem persists, contact the Xerox Welcome Center.
Data was printed using a substitute font. Check the print data.
An error occurred during PostScript processing. Check the print data, or disable
bi-directional communication on the print driver.
The data was divided because the hard disk ran out of space. Delete
unnecessary data from the hard disk.
Description and Remedy
.