Xerox WorkCentre 5230A System Administration Manual page 400

15 Problem Solving
Code
016-738
016-739
016-740
016-741
016-742
016-743
016-744
016-745
016-746
016-747
016-748
016-749
016-750
016-751
016-752
016-753
016-755
400
The Booklet Creation feature does not support the paper size specified. Select a
paper size supported by the Booklet Creation feature.
The specified paper size is not appropriate. Make sure that the combination of
the document and paper sizes is feasible for the Booklet Creation feature.
The Booklet Creation feature does not support the paper tray specified. Select a
paper tray supported by the Booklet Creation feature.
Unable to enter the downloading mode.
The product ID in the downloaded data is invalid. Try downloading again.
The downloaded files are not supported. Download files available for the model
of your machine.
An error occurred to the data being downloaded. Check if the connection
between the external device and the machine is secured, and try executing the
operation again.
An XPJL error occurred while downloading. Try executing the job again. Contact
the Xerox Welcome Center if the problem persists.
Received a PDF file containing unsupported functions. Use a print driver to print
the file.
An error occurred while annotation image data was being processed due to
insufficient memory. Take one of the following actions:
• Increase the annotation image size.
• Reduce the number of the images in [Page Layout] > [Repeat Image].
• Contact the Xerox Welcome Center if the problem persists.
Unable to print due to insufficient hard disk space. Reduce the number of pages
in print data, for instance by dividing the print data, or by printing one copy at a
time when making multiple copies.
The printer language received from a print driver is not supported on the
machine. Use the machine's print driver. If the problem persists, contact the
Xerox Welcome Center.
Or, the printer language received for the Internet Fax job is not supported on the
machine. Request the sender to send the document with a printer language
supported by the machine.
Printing banner sheets was cancelled. Enter the System Administration mode
on the touch screen. Press the <Machine Status> button, and select the [Tools]
tab on the [Machine Status] screen. From [System Settings] > [Print Service
Settings] > [Other Settings], select [Banner Sheet] and set [Start Sheet], and
also select [Banner Sheet Tray] and set [Tray 1].
During the PDF Bridge processing, a syntax error, undefined command use, a
parameter error, PDF file corruption, or a PDF decomposer internal error
occurred. Or, when the PDF Direct Print mode is set to PostScript (1), an
insufficient memory error occurred. Print using the print driver from Acrobat
Reader, or increase the PostScript memory.
An error occurred due to insufficient memory. Change the print mode to a higher
speed mode. If the problem persists, add memory.
The entered password is invalid for the PDF file. Set the correct password on
ContentsBridge.
A print error occurred. The PDF file is print protected. Use Adobe Reader to
cancel the print protection.
Description and Remedy