Data Connection To The Seca Connect 103 Software; Data Connection Via The Seca 360° Wireless Connection; Print - Seca mVSA 535 Instructions For Use Manual

9.7 Data connection to the seca connect 103 software

Fault
Data transmission cannot
be set up between device
and
seca connect 103
User ID cannot be found
when logging in to the
device
Patient ID cannot be found
when searching for the
patient on the device
9.8 Data connection via the seca 360° wireless connection
Fault
The fields "Weight" and
"Height" are not shown in
the device display
Neither weight nor height
values are shown in the
device display

9.9 Print

Fault
Print function not available
Results report not being
printed
92 • /
seca mVSA 535 seca mBCA 525
Information about the data connection to the
be found in the following documents:
• Integration instructions for
• System instructions for use for
Cause
Software versions not compatible
No connection to the server
User ID not recognized by the server
No connection to the server
Patient ID not recognized by the server
Cause
wireless module of
seca 360° wireless
the device not activated
wireless module of
seca 360° wireless
the connected scale/stadiometer not
activated
No wireless
seca 360° wireless
connection set up
Scale/stadiometer not wireless-
capable (do not contain a
wireless module)
seca 360° wireless
Cause
Software versions not compatible
PC printer not switched on
The PC on which the
PC software is
seca analytics 115
installed is not switched on
No network connection set up between
device and
seca analytics 115
software
No connection set up between
PC software and PC
seca analytics 115
printer
seca mVSA 535
seca 103/452
Administrator:
Use a compatible version of the
seca connect 103
Administrator:
Check server connection
Ensure that user ID is valid
Administrator:
Check server connection
Ensure that patient ID is valid
Administrator:
➔
Setting up seca 360° wireless the
network
Administrator:
➔
Setting up seca 360° wireless the
network
Enter measured values manually:
➔
Entering basic parameters
Use a compatible version of the
seca analytics 115
936 or higher
Switch on PC printer
Switch on PC
PC Administrator: Set up LAN connection
Administrator: Set up connection between
seca analytics 115
printer
software can
seca connect 103
(version 2.0 or higher)
Remedy
software ➔
Compatibility
Remedy
Remedy
PC software: 1.4 Build
PC software and PC