Charging Rechargeable Batteries; Setting The Date And Time - Seca mVSA 535 Instructions For Use Manual

4.4 Charging rechargeable batteries

4.5 Setting the date and time

Before starting up the device for the first time, the rechargeable batteries for
the monitor and the measuring mat - if there is a measuring mat - must be
fully charged.
1. Ensure that the measuring mat is correctly suspended in the magnetic
catch of the monitor ➔
catch.
2. Connect the device to the power supply ➔
3. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
The charging process starts.
The current charging status is displayed for approx. 15 seconds:
After approx. 5 minutes, the device switches to standby.
The screen goes off.
The LED of the ON/OFF button flashes green.
When the rechargeable batteries are fully charged, the device switches
off.
The LED of the ON/OFF button goes off.
NOTE
Leave the device connected to the power supply for approx. 4 hours
when starting it up for the first time. This ensures that the recharge-
able batteries for the monitor and the measuring mat are fully charged.
When you start up the device for the first time, you first need to set date and
time.
1. Ensure that the measuring mat - if there is a measuring mat - is correctly
suspended in the magnetic catch of the monitor ➔
measuring mat in the magnetic
2. Connect the device to the power supply.
Suspending the measuring mat in the magnetic
Establishing a power
catch.
Starting up the device • 35
English
supply.
Suspending the