Displaying Weight And Height - Seca mVSA 535 Instructions For Use Manual

Displaying weight and height

74 • /
seca mVSA 535 seca mBCA 525
➔
Receiving weight and height from seca 360° wireless device
➔
Adopting weight and height from a seca patient file
In the vital signs tab, you can have a patient's weight and height displayed.
You have the following options:
NOTE
The fields "Weight" and "Height" appear in the vital signs tab if the
seca 360° wireless
be activated/deactivated with administrator rights ➔
administrators: Configuring seca mVSA 535/seca mBCA
Receiving weight and height from
1. Measure the patient as described in the instructions for use for the
device.
seca 360° wireless
2. Transmit the measured values as described in the instructions for use for
the
seca 360° wireless
The values received appear in the vital signs tab of the mVSA.
Adopting weight and height from a seca patient file
1. Open a secapatient file or create a new one ➔
file, ➔
Creating a seca patient
2. Enter the values for weight and height in the seca patient file ➔
basic parameters.
module of the mVSA is activated. The module can
seca 360° wireless
device.
Calling up a seca patient
file.
For
525.
device
Entering