Modifying presets
NOTE
Your settings apply only to the current measurement procedure. If you
stop the measurement procedure ➔
dure, the presets defined by the administrator become active again.
1. Ensure that the blood pressure cuff is not applied.
2. Press the NIBP field.
The NIBP settings dialog window opens.
The presets are displayed.
3. Press the desired measurement method.
• Upward measurement, continue at Step 5.
• Downward measurement, continue at Step 4.
4. Adapt initial pressure if necessary.
5. Press the desired number of measurements.
• Single measurement
• Multiple measurement
6. Press the confirm button.
The dialog window closes.
Changed settings are used for the current measurement.
7. Start the blood pressure measurement as described in the section
entitled ➔
Starting blood pressure
Stopping a measurement proce-
measurement.
Operation • 57
English