Connecting The In-Ear Thermometer; Connecting The Spo Sensor - Seca mVSA 535 Instructions For Use Manual

Connecting the in-ear thermometer

Connecting the SpO
2
32 • /
seca mVSA 535 seca mBCA 525
1. Put the connector for the in-ear thermometer in the socket on the
SmartBucket until you feel the connector engage.
2. Place the in-ear thermometer in the thermometer compartment as shown
in the illustration below.
sensor
1. If necessary, connect a patient cable to the SpO
the user documentation from the sensor manufacturer.
ATTENTION
Device damage, malfunction
The temperature probe can only be pushed right into the probe holder
if it does not have a probe cover on.
► Ensure that there is no probe cover on the temperature probe.
NOTE
The storage compartment on the probe connection provides space
for two packs of probe covers.
=>
NOTE
The magazine holder in the thermometer compartment provides
space for two probe cover magazines.
NOTICE!
Device damage, malfunction
The SpO sensor must be compatible with the SpO
2
®
equipment (Masimo SET
► Ensure that the SpO
sensor is compatible with the SpO
2
equipment fitted in your device ➔
parts.
► Follow the user documentation from the sensor manufacturer.
=>
=>
or seca) fitted.
Optional accessories and spare
sensor as described in
2
Press!
measuring
2
measuring
2