4. SETTING UP PERIPHERALS
4.1 Setting up LAN connection to the network (stationary operation)
Introduction
128 •
seca mVSA 535
/
seca mBCA 525
➔
Setting up LAN connection to the network (stationary operation)
➔
Setting up WiFi connection (mobile operation)
➔
Setting up a data connection to the seca analytics 115 PC software
➔
Setting up a data connection to the seca connect 103 software
➔
Data export and backup
➔
Setting up seca 360° wireless the network
➔
Introduction
➔
Activating the LAN connection
➔
Deactivating the LAN connection
For stationary use, for example, in a treatment room at your practice, you can
connect the monitor to your LAN network to exchange data using the
or
seca analytics 115
seca connect 103
A requirement for exchanging data with the
is that the
seca analytics 115
alone PC and the network configuration (UDP or DHCP) is known.
A requirement for exchanging data with the
that the
seca connect 103
tion of the
seca connect 103
seca 531
Measuring mat
WiFi direct
seca mBCA 525/
seca mVSA 535
Monitor
If you connect the device to your network via LAN cable, the measuring mat,
if present, can communicate with the monitor via the factory-activated WiFi
direct (BIA mat) connection. This allows data to be exchanged even when
the measuring mat is not suspended in the magnetic catch of the monitor.
PC software.
seca analytics 115
PC software is installed on a server or stand-
seca connect 103
software is installed on a server and the configura-
software (server IP and connect port) is known.
LAN
LAN
LAN-Router
PC software
software is
Server/Stand-Alone-PC