Connecting The Measuring Mat - Seca mVSA 535 Instructions For Use Manual

Connecting the measuring mat

10. Remove the electrode cables from the electrodes.
11. Remove the electrodes from the patient.
12. Suspend the measuring mat in the magnetic catch of the monitor
➔
Suspending the measuring mat in the magnetic
The updated seca patient file is transmitted to the monitor.
The measurement procedure is complete when the Measurement
successful message appears.
You have the following options for continuing:
► Press the
► Press the
► Press the analysis tab ➔
► Press the vital signs tab: ➔
► Press the
The measuring mat is intended for bioimpedance measurement with the 8-
point method (measurement of the whole body) with the patient in a lying
position. Measurement by the 4-point method (right half of the body) is
likewise possible.
1. Lay the measuring mat on the patient's knees.
► The side with the writing on it should be facing upwards
► The keypad should be facing the user
NOTE
If you wish to measure using the 4-point method, attach the electrode
cables on the keypad for the measuring mat to the hand and foot
electrodes of the right half of the body.
button: Add comments
button: Save measurement
Analyzing measurement
Measuring vital signs
button: Discard measurement
English
catch.
Operation • 51