Operating The Device In A Pc Network; Connecting The Network Via Ethernet Or; Seca 360° Wireless Network - Seca 514 Administrator's Manual

4.4 Operating the device in a PC network

Connecting the network via
Ethernet or seca 360° wireless
The device does not have "on-board" patient and user administration. If you
wish to administer seca patient files and user accounts, the device must be
connected to a PC on which the
the following connection options:
• network connection via
• indirect connection via USB memory stick
The
seca 115
configured by experienced PC administrators or hospital technicians.
ATTENTION!
Loss of data
Incorrect installation or incorrect changes to the installation can lead
to loss of data and, as a result, to misdiagnoses.
►
Make sure the installation or changes to the installation are carried
out by an experienced administrator or hospital technician.
If the device is to be directly integrated in a PC network, the steps below are
necessary.
network
• Install the
• Administer the
• Configure the
• Set up Ethernet or seca wireless network
Details on the steps mentioned can be found in the section entitled "Configur-
ing the device" from page 28 and in the Administrator Manual for the
PC software.
seca 115
wireless network or Ethernet
seca 360°
software and the device itself should only be installed and
PC software on the PC
seca 115
PC software
seca 115
seca 515/514
seca 115
PC software is installed. You have
seca 115
Making the device operational • 21
English
seca 115