Fitting The Probe Holder; Removing/Fitting The Magazine Holder (Devices With In-Ear Thermometer); Removing The Magazine Holder; Fitting The Magazine Holder - Seca mVSA 535 Instructions For Use Manual

Fitting the probe holder

6.5 Removing/fitting the magazine holder (devices with in-ear thermometer)

Removing the magazine holder

Fitting the magazine holder

1. Insert the probe holder in the SmartBucket as shown in the illustration
below.
2. Close the cover cap until you hear it engage.
1. Lift the magazine holder with a finger until the magazine holder comes out
of its catch.
2. Remove the magazine holder
1. Insert the magazine holder in the SmartBucket as shown in the illustration
below.
2. Push down the magazine holder until you feel it engage.
Click!
Click!
Hygiene treatment • 83
English