Operation; Switching The System On/Off; Switching On - Seca mVSA 535 Instructions For Use Manual

5. OPERATION

5.1 Switching the system on/off

Switching on

38 • /
seca mVSA 535 seca mBCA 525
➔
Switching the system on/off
➔
Managing seca patient files
➔
Preparing a seca patient file
➔
Measuring bioimpedance
➔
Measuring vital signs
➔
Analyzing measurement
➔
Operation when connected to a hospital information system
➔
Switching on
➔
Logging in
➔
Logging out/switching user
➔
Saving energy
➔
Switching the monitor to standby
➔
Switching off
1. Ensure that the measuring mat - if there is a measuring mat - is correctly
suspended in the magnetic catch of the monitor ➔
measuring mat in the magnetic
2. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
The device starts up. This takes a few seconds.
The vital signs tab is displayed.
The measuring mat - if there is one - switches on automatically.
You have the following options:
► Measure vital signs (without patient identification) ➔
signs
► Use full functional scope: Log in ➔
Suspending the
catch.
Logging in
Measuring vital