Maintenance; Technical Data - Seca 985 Instruction Manual And Guarantee

Er:1:11
... the display
– At least one weighing cell is not correctly connected or the connection is back to front.
Check the connections. The colours of plug and socket must match.
Switch the scale off using the Start key and restart. The scale then works normally
again. If this is not the case, inform Servicing.
Er:1:12
... the display
– The maximum weight for switching on was exceeded when the scale was switched on,
e.g. if bed and patient are being weighed. Remove the load from the scale and start it
again. The scale then works normally again. If this is not the case, inform Servicing.
... one segment is permanently illuminated or is not illuminated at all?
– The relevant segment is faulty. Inform Servicing.

8. Maintenance

Have the scale recalibrated by authorised persons in accordance with national legal re-
quirements. The year of initial calibration can be found behind the CE symbol on the rating
plate above the number of the appointed office, 0109 (Hessen Weights & Measures Of-
fice). Recalibration is essential if one or more security marks are damaged or the calibra-
tion counter does not match the number on the applicable calibration counter mark (cf.
page 27).
We recommend having your scale serviced by your local service agent before having it
recalibrated. seca Customer Service will be pleased to give you further assistance.

9. Technical data

Dimensions
width:
height:
depth:
weight
Measuring feet
width:
height:
depth:
weight:
Cable length:
Size of figures in display
Temperature range
Calibration as per Directive
2009/23/EC
Medical product as per Directive
93/42/EEC
Maximum load
Model 985
appears?
appears?
540 mm
990 mm
540 mm
approx. 25 kg
328 mm
150 mm
212 mm
approx. 6.2 kg
2.80 m
20 mm
+10 °C to +40 °C
approved for medical use, Class III
Class I with measuring function
250 kg
35
GB