Setting Up A Data Connection To The Seca Analytics 115 Pc Software; Introduction; Connecting The Device Automatically (Udp) - Seca mVSA 535 Instructions For Use Manual

4.3 Setting up a data connection to the seca analytics 115 PC software

Introduction

Connecting the device
automatically (UDP)
➔
Introduction
➔

Connecting the device automatically (UDP)

➔
Connecting the device manually (TCP)
➔
Exporting patient and user data manually
➔
Setting up automatic export
If you connect the device to the
following functions are available:
• Synchronize patient and user data automatically ➔
and user data manually.
• seca directprint : Issue results reports directly from the device on a
network printer ➔
Viewing an
A requirement is that the device is connected to the LAN or WiFi network of
your institution.
➔
Setting up LAN connection to the network (stationary operation)
➔
Setting up WiFi connection (mobile operation)
LAN/WiFi
seca mBCA 525/ Server/Stand-Alone-PC
seca mVSA 535 (seca mediator service)
NOTE
• You specify the network printer for the
directly in the
seca analytics 115
• You should also follow the administrator manual for the
seca analytics 115
1. Press the Peripherals tab.
2. Press the seca connect button.
The seca connect configuration dialog window opens.
PC software, the
seca analytics 115
analysis.
LAN/WiFi
seca 115
Network-Printer
seca directprint
PC software.
PC software.
Setting up peripherals • 135
English
Exporting patient
function