Deactivating The Lan Connection - Seca mVSA 535 Instructions For Use Manual

Deactivating the LAN connection

NOTE
• If the WiFi off setting is selected, the measuring mat must be
mounted in the magnetic catch of the monitor before and after every
measurement so that data can be exchanged via the infrared inter-
face.
• If the device is integrated in a LAN network, the WiFi client
(network) mode is not available.
10. Press the button to confirm your entry.
11. You have the following options for continuing:
► ➔
Setting up a data connection to the seca analytics 115 PC
software
► ➔
Setting up a data connection to the seca connect 103 software
1. Press the Peripherals tab.
2. Press the LAN button.
3. Press the LAN active checkbox.
The LAN function is deactivated.
The connection data are deleted.
4. To reactivate the LAN function, proceed as outlined below:
a) Press the LAN active checkbox
b) ➔
Activating the LAN connection
English
Setting up peripherals • 131