Preparing A Seca Patient File; Introduction; Entering Basic Parameters - Seca mVSA 535 Instructions For Use Manual

5.3 Preparing a seca patient file

Introduction

Entering basic parameters

➔
Introduction
➔
Entering basic parameters
Before every bioimpedance measurement ➔
have to prepare a seca patient file in the patient tab. The prepared
seca patient file is transmitted to the measuring mat.
You do not initially need to prepare a patient file for vital signs measurement
➔
Measuring vital signs. After the measurement, you can decide whether you
want to assign the measuring results to a patient file.
Preparation of the seca patient file includes the following items:
• Call up or create seca patient file ➔
➔
Creating a seca patient file
• Enter weight, height, waist circumference and Physical Activity Level
➔
Entering basic parameters
After you have called up a seca patient file ➔
created a new one ➔
Creating a seca patient
parameters so that the device can analyze BIA measurements correctly.
You can enter the values for basic parameters manually or take them from
other sources:
Measuring bioimpedance, you
Calling up a seca patient file
Calling up a seca patient file
file, you must enter basic
Operation • 45
English
or
or