FOR ADMINISTRATORS: CONFIGURING seca mVSA 535/
seca mBCA 525
English
1. PREPARING CONFIGURATION
1.1 Administrator login
108 •
seca mVSA 535
/
seca mBCA 525
157
➔
Preparing configuration
➔
User accounts
➔
Making settings for measuring
mode
➔
Setting up peripherals
NOTE
This document describes the maximal equipment of the
/
seca mVSA 535
seca mBCA 525
blood pressure, temperature, oxygen saturation and bioimpedance.
Depending on the actual equipment of your device, some of this infor-
mation may not be relevant to your device. Pay attention to the infor-
mation in this document which is relevant to your device.
NOTE
• This part of the user documentation contains information about con-
figuring the device for measuring mode and for integrating it in a net-
work.
• Integrating this device in a network containing other devices may
lead to previously unknown risks to patients, operators or third par-
ties. It is the responsibility of the operating company to determine,
analyze, evaluate, and control these risks.
• The functions described in this part of the user documentation are
accessible only to users with administrator rights.
• Follow the information in the instructions for use ➔
use for seca mVSA 535/seca mBCA
➔
Administrator login
➔
Configuration options
NOTICE!
Faulty configuration
During configuration, data are transmitted to the measuring mat via
the infrared interface. The infrared interface is located in the magnetic
catch of the monitor.
► Ensure that the measuring mat is correctly suspended in the mag-
netic catch of the monitor throughout the entire configuration pro-
cess ➔
Suspending the measuring mat in the magnetic
1. Switch on the device.
The measuring mat switches on automatically.
2. Log in as the administrator:
► Initial login: ➔
Activating initial user accounts
► Regular login: Continue at Step 3.
➔
Managing system components
➔
Factory settings
➔
Instructions for use for
seca mVSA 535/seca mBCA 525
product family: measurement of
Instructions for
525.
catch.