Setting Up Seca 360° Wireless The Network; Introduction - Seca mVSA 535 Instructions For Use Manual

4.6 Setting up seca 360° wireless the network

Introduction

➔
Introduction
➔
Activating/deactivating the seca 360° wireless module
➔
Setting up a seca 360° wireless connection
If you use devices from the
a measuring station, you can link them to the mVSA/mBCA. You can transmit
the parameters height and weight directly to the mVSA/mBCA and adopt
them in a seca patient file.
On the mVSA, the values also appear in the vital signs tab.
In order to be able to communicate with devices from the
system, the seca 360° wireless
vated and a wireless group set up.
NOTE
• The device can only receive data, not send it, via the
seca 360° wireless
• The fields "Weight" and "Height" only appear in the vital signs tab if
the seca 360° wireless
• Follow the instructions in this section to achieve a stable connection
of the desired seca 360° wireless
sired integration of other devices.
• You should also follow the instructions for use for the
seca 360° wireless
system in your institution, e.g.
seca 360° wireless
module of the mVSA/mBCA must be acti-
connection.
module is activated.
devices and to prevent the unde-
system devices being used.
Setting up peripherals • 143
English
seca 360° wireless