Stopping a measurement procedure
Assigning anonymous
measurement procedure to a seca
patient file
3. Press the vital signs tab on the mVSA.
Weight and height are displayed.
You have to stop the current measurement procedure before you can start a
new measurement procedure. You have the following options:
► Save measurement procedure: Press the
► Assign anonymous measurement to a seca patient file: ➔
anonymous measurement procedure to a seca patient file
► Discard measurement procedure: Press the
To assign an anonymous measurement procedure to a patient file, proceed
as follows:
1. Press the patient tab.
2. Select an action:
► Press the open patient list button
► Press the create patient file button
3. Continue according to your login status:
► Not logged in: Log yourself in ➔
► Logged in: Continue at Step 4.
4. Proceed according to your selection in Step 2.
• ➔
Calling up a seca patient file
• ➔
Creating a seca patient file
5. Confirm the Assign measurement? message.
The measurement procedure is assigned to the patient file.
6. Press the
button.
The measurement procedure is saved.
button
Assigning
button
Logging in
Operation • 75
English