6.3 Setting up a connection to the seca connect 103 software
Entering connection data
➔
Setting up a seca 360° proximity connection
➔
Making workflow settings
The device must be connected to the
be able to communicate with your EMR system.
The following requirements must be met for this:
• The device is connected to your LAN or WiFi network
• The server address and port for the
• The EMR system is connected to the
formation on this can be found in the
for use (from version 2.0 or higher)
NOTE
• Follow the information in this section of the document ➔
interfaces and network
• Information on connecting the EMR system to the
seca connect 103
system instructions for use (from version 2.0 or higher)
1. Press the Peripherals tab.
2. Press the seca connect button.
The seca connect configuration dialog window opens.
3. In the Connect Mode drop-down menu, select the option
.
seca connect 103
seca connect 103
seca connect 103
seca connect 103
seca 103/452
ports.
software can be found in the
Connecting to an EMR system • 151
English
software in order to
are known
software. In-
system instructions
Monitor
seca 103/452