Seca mVSA 535 Instructions For Use Manual page 50

50 • /
seca mVSA 535 seca mBCA 525
4. Press the bia tab.
NOTE
If you press the operating steps on the screen, additional information
will be displayed to assist you with the bioimpedance measurement.
5. Attach the electrodes to all extremities as shown.
6. Take the measuring mat out of the magnetic catch.
7. Connect the measuring mat to the electrodes ➔
measuring mat.
8. Use the keypad of the measuring mat for the following steps:
a) Enter patient position: Press the relevant position button
b) Start the measurement procedure: Press the
9. Observe measuring progress on the measuring mat:
Measurement progress
1. • Patient position is given
• Electrodes being tested
2. • Measurement in progress
• Measuring results will be stored
on the measuring mat
3. Measurement end: Measuring
results are stored on the
measuring mat, waiting for
transmission to the monitor
Connecting the
Measuring mat
Electrodes
On
Flashing
Off
button
Patient
position
On
On
Flashing