Setting Up Device; Connecting The Smartbucket - Seca mVSA 535 Instructions For Use Manual

4.2 Setting up device

Connecting the SmartBucket

30 • /
seca mVSA 535 seca mBCA 525
No. Accessory for the version shown
h
TM
COVIDIEN FILAC
i
Push-button electrodes for affixing to patient (pack of 100)
Measuring mat with rechargeable battery and electrode
j
cables
➔
Connecting the SmartBucket
➔
Connecting the blood pressure cuff
➔
Connecting the temperature probe
➔
Connecting the in-ear thermometer
➔
Connecting the SpO
2
➔
Suspending the measuring mat in the magnetic catch
NOTE
This section shows how to assemble all of the measurement accesso-
ries available for this device. The actual scope of delivery of your
device may be less than this.
NOTICE!
Device damage, malfunction
Excessive use of force may damage tubes and cables.
► In order to connect measuring accessories to the device or remove
them from it, take hold of tubes only by the tube coupling.
► In order to connect measuring accessories to the device or remove
them from it, take hold of cables only by the connectors.
► Use only measuring accessories which have no externally visible
damage.
NOTICE!
Malfunction
The SmartBucket needs one of the USB interfaces for communication
and power supply. If the USB connection is removed, no vital signs
can be measured.
► Always keep the SmartBucket connected to the USB interface.
► Only connect accessories, for example a USB memory stick, to the
other USB interface.
► Connect the USB cable of the SmartBucket to a free USB port of the
monitor.
TM
3000 temperature probe
sensor
Pcs.
1
1
1