1. Take the in-ear thermometer out of the SmartBucket.
2. Make sure that the lens of the measuring head is clean.
3. Press the
button to switch on the in-ear thermometer.
4. Pick up a probe cover:
a) Push the measuring head firmly into a probe cover in the magazine
b) Ensure that the probe cover engages audibly with the measuring
head
c) Remove the probe cover and thermometer from the magazine
d) Ensure that the probe cover is undamaged
Click!
The system is ready to measure when the monitor and the display of the
in-ear thermometer display dashes, the current measuring position and
the thermometer icon as shown in the illustration below.
5. Introduce the measuring head into the patient's auditory canal as shown
in the illustration.
English
Operation • 65