Setting Up Automatic Export - Seca mVSA 535 Instructions For Use Manual

Setting up automatic export

This function allows you to transmit measuring results to a practice or hospital
information system automatically. The export takes place as soon as data are
generated or amended on the device. To be able to use this function, an
interface to the
seca analytics 115
practice or hospital information system.
1. Establish which data format your practice or hospital information system
accepts.
2. Press the Peripherals tab.
3. Press the seca connect button.
4. In the Connect mode dropdown menu, select the seca analytics 115
TCP or seca analytics 115 UDP option.
5. Press the button
The seca analytics 115 configuration page is displayed.
6. Ensure that the Automatic synchronisation checkbox is activated.
7. Press the desired export format.
• Automatic export CSV
• Automatic export EMR
8. To adopt the settings, proceed as follows:
a) Press the
b) Press the
The settings are adopted.
9. Set up an interface to the
practice or hospital information system.
PC software must be set up in your
button
button
PC software in your
seca analytics 115
Setting up peripherals • 139
English