3.6 Making presets for vital signs measurement
Presets for blood pressure
➔
Presets for blood pressure
➔
Presets for pulse rate (seca measuring equipment only)
➔
Presets for SpO
2
➔
Presets for temperature (COVIDIEN
➔
Selecting color mode for "vital signs" tab
In the Settings tab you can set up the settings for blood pressure, tempera-
ture and SpO
measurements preferred in your institution.
2
The user can modify the settings during a measurement procedure
➔
Measuring vital
signs. The presets will be active again after the end of the
measurement procedure.
For the vital signs tab, you can select a color mode to enable the device to
be read perfectly whatever the illumination conditions. This function is not
available for other tabs. This setting cannot be changed during a measure-
ment procedure.
1. Press the Settings tab.
2. Press the Measurement vital signs button.
TM
TM
FILAC
3000 only)
Making settings for measuring mode • 121
English