Presets For Temperature; (Covidien Tm Filac Tm 3000 Only) - Seca mVSA 535 Instructions For Use Manual

Presets for temperature

TM TM
(COVIDIEN FILAC
Normal
Adaptive Probe Off Detection
(APOD)
Maximum
Stable
Normal
Sensitive
5. Press the confirm button.
The dialog window closes.
The modified settings are adopted.
1. Press the Settings tab.
3000 only)
2. Press the Measurement vital signs button.
3. Ensure that the temperature probe is pushed completely into the probe
holder.
NOTE
The "maximum" setting (Masimo SET
as a preset. Select this setting for each measurement directly
➔
Measuring oxygen saturation (SpO
Masimo SET
Mode
seca SpO
Mode
Making settings for measuring mode • 125
®
pulse oximetry) is not available
).
2
®
SpO module
2
Indication
• Normal perfusion
• Mild perfusion disorders
Vigorous patient movements
• Poor perfusion
• Severely disrupted signal, for
example due to indoor lighting or
direct sunlight
module
2
Motion tolerance
English
High
Normal
Low