Setting Up Wifi Connection (Mobile Operation); Introduction; Activating The Wifi Connection - Seca mVSA 535 Instructions For Use Manual

4.2 Setting up WiFi connection (mobile operation)

Introduction

Activating the WiFi connection

132 • seca mVSA 535 / seca mBCA 525
➔
Introduction
➔
Activating the WiFi connection
➔
Deactivating the WiFi connection
For mobile use, for example on the ward of a hospital, you can integrate the
device in your network as a WiFi client to exchange data with the
or
seca analytics 115 seca connect 103
A requirement for exchanging data with the
that the seca analytics 115
PC and access data for your WiFi network are known.
A requirement for exchanging data with the
that the
seca connect 103
tion of the seca connect 103
seca 531
Measuring mat
Infrared
seca mBCA 525/
seca mVSA 535
Monitor
If you connect the device to your network as a WiFi client, the measuring mat,
if present, can only communicate with the monitor via the infrared interface.
NOTICE!
Malfunction
The measuring mat and the monitor can communicate via the infrared
interface only when the measuring mat is suspended in the magnetic
catch of the monitor.
► Ensure that the measuring mat is suspended in the magnetic catch
of the monitor before and after every measurement.
1. Ensure that the measuring mat is correctly suspended in the magnetic
catch of the monitor.
2. Press the Peripherals tab.
3. Make sure that the LAN connection to the network is not active
➔
Deactivating the LAN
PC software.
seca analytics 115
PC software is installed on a server or standalone
seca connect 103
software is installed on a server and the configura-
software (server IP and connect port) is known.
WiFi
WiFi-Router
connection.
software is
software is
WiFi
Server/Stand-Alone-PC