Seca mVSA 535 Instructions For Use Manual page 49

Performing a measurement (without
WiFi direct connection to the
measuring mat)
The measurement procedure is complete when the Measurement
successful message appears.
You have the following options for continuing:
► Press the
► Press the
► Press the analysis tab ➔
► Press the vital signs tab: ➔
► Press the
10. Remove the electrode cables from the electrodes.
11. Remove the electrodes from the patient.
If no WiFi direct connection between the monitor and measuring mat is
active, some operating steps can only be carried out at the measuring mat.
Measuring mat and monitor communicate via an infrared connection. The
measuring mat must be suspended in the magnetic catch of the monitor
before and after a measurement to enable data to be transferred.
NOTE
If you are unsure whether the WiFi direct connection between the
monitor and the mat is active, contact your administrator.
1. Switch on the system ➔
2. Ensure that the measuring mat is correctly suspended in the magnetic
catch of the monitor ➔
catch.
The symbol is displayed on the monitor.
3. Prepare the seca patient file ➔
The seca patient file is transmitted to the measuring mat.
button: Add comments
button: Save measurement
Analyzing measurement
Measuring vital signs
button: Discard measurement
Switching the system on/off.
Suspending the measuring mat in the magnetic
Preparing a seca patient
English
file.
Operation • 49