Initial Login - Seca mVSA 535 Instructions For Use Manual

4.6 Initial login

36 • /
seca mVSA 535 seca mBCA 525
3. Press the ON/OFF button of the monitor.
The LED of the button is white.
The initial start screen appears.
4. Enter the current date:
a) Press the
b) Enter the current date using the keypad
c) Confirm your entry by pressing the
5. Enter the current time:
a) Press the
b) Enter the current time using the keypad
c) Confirm your entry by pressing the
6. Press the
7. Continue operating the device – you have the following options:
► Leave device switched on (recommended): ➔
rechargeable batteries
► Perform measurements using the power supply: ➔
► Configure device using the power supply: ➔
Configuring seca mVSA 535/seca mBCA 525
The following user accounts are available on the device initially:
• "admin": (Configure and administer device)
• "user": (Perform measurements and manage them)
On initial login, these user accounts must be activated.
Additional user accounts can only be set up in the
software and must be synchronized with the device.
input field
input field
button.
seca analytics 115
button
button
Charging
Operation
For administrators:
PC