Resetting The User Interface; Exporting The System Log - Seca mVSA 535 Instructions For Use Manual

6.3 Resetting the user interface

6.4 Exporting the system log

Use the reset GUI function to reset the user interface (GUI = Graphical User
Interface) of the device to ➔
accounts are retained by this process.
NOTE
If all seca patient files and user accounts are to be removed from the
device, proceed as described in the section entitled ➔
device.
1. Press the Reset tab.
2. Press the reset GUI button.
The user interface will be reset to ➔
seca patient files and user accounts will be retained.
This function allows you to export the system log and make it available to
seca Service for support purposes, for example.
1. Press the System tab.
2. Press the Data management button.
3. Press the Export button.
4. Select the export destination:
► USB memory stick: Continue at Step 5.
► Network: Continue at Step 6.
5. Connect a USB memory stick to the monitor.
Factory settings. seca patient files and user
Factory settings.
Factory settings • 155
English
Resetting the