Setting Up A Data Connection To The Seca Connect 103 Software - Seca mVSA 535 Instructions For Use Manual

4.4 Setting up a data connection to the seca connect 103 software

140 • seca mVSA 535 / seca mBCA 525
NOTE
• Settings you make in this dialog window are transmitted to the
seca analytics 115
manually.
• Note the user documentation for the practice or hospital information
system used.
• seca Service will be pleased to assist if you have any questions
relating to "interface configuration".
The device must be connected to the
be able to use the following functions in conjunction with a compatible hospi-
tal information system:
• Use HIS user IDs and HIS password to log in to the device
• Call up and display HIS patient data from the device
• Transmit measuring results from the device to a hospital information
system
The following requirements must also be met:
• Device is connected to the LAN or WiFi network of your institution
• Server address and port for the
• Hospital information system is connected to the
software.
Further information is available in the following documents:
• Integration instructions for
• System instructions for use for seca 103/452 (version 2.0 or higher)
NOTE
► seca recommends performing the device integration exclusively in
collaboration with seca Service and the manufacturer of your hospi-
tal information system.
► Connection of the device to an information system has an impact on
the measuring sequence and on operation of the device. For details,
see the integration instructions for
ers about these deviations before commissioning the system.
PC software ➔
Exporting patient and user data
seca connect 103
seca connect 103
seca mVSA 535
seca mVSA 535
software in order to
are known
seca connect 103
. Inform your us-