Activating Automatic Synchronization - Seca mVSA 535 Instructions For Use Manual

Activating automatic
synchronization
3. In the Connect mode dropdown menu, select the seca analytics 115
TCP option.
The recommended presets are displayed.
4. Adapt the default settings if necessary.
5. In the Connect Server IP line, enter the appropriate IP address.
Configuration
PC software
seca analytics 115
as client/server solution
PC software
seca analytics 115
as a standalone solution
6. In the Connect Port line, enter the port of the PC selected under 5.
(default setting: 20010).
You have the following options for continuing:
► Press the
➔

Activating automatic synchronization

► Press the
Confirm settings, end dialog
If you are using the device in combination with the
software, you should activate automatic synchronization. The following data
are then synchronized as soon as they are changed either on the device or in
the PC software:
• seca patient files
• User accounts and passwords
• Automatic export settings Peripherals
NOTICE!
Malfunction
In order to be able to use automatic synchronization, a connection to
the PC software must be set up ➔
the seca analytics 115 PC
► Ensure that the connection to the PC software is set up before you
activate automatic synchronization.
IP address
The IP address of the PC on which
the
seca analytics 115
was installed with the
options
Complete
IP address of the PC workstation
button:
button:
seca analytics 115
Setting up a data connection to
software.
Setting up peripherals • 137
English
PC software
or
Server
PC