Connecting The Blood Pressure Cuff; Connecting The Temperature Probe - Seca mVSA 535 Instructions For Use Manual

Connecting the blood pressure cuff

Connecting the temperature probe

1. Connect the tube coupling for the blood pressure cuff to the compressed
air connection of the device until you hear the tube coupling engage.
=>
2. Stow the blood pressure cuff in the SmartBucketas shown in the
illustration below.
1. Open the cover cap of the connection compartment.
2. Insert the connector for the temperature probe completely in the probe
connection as shown in the illustration below.
3. Close the cover cap of the connection compartment.
Press!
4. Push the temperature probe completely into the probe holder as shown in
the illustration below.
=>
=>
Click!
=> =>
=>
Starting up the device • 31
English
Click!