Setting Up Seca Cls Network (Via Ethernet Only) - Seca 514 Administrator's Manual

Setting up seca CLS network (via
38 •
4. In the
5. Press the
The dialog window for setting up the Ethernet network appears.
6. Make the applicable settings for your network.
7. Press the
The new settings are active.
To enable communication between the device and the
via Ethernet, you must link the device to the CLS server and the seca media-
Ethernet only)
tor service. CLS server and seca mediator service are communication mod-
ules of the
Once the link to the two communication modules has been set up, the
following functions can be used directly from the device:
• accessing the seca patient database of the
• printing out a detailed results report directly from the device on a PC printer
(the printer is selected in the
The
on which the two communication modules and the seca patient database are
installed must be switched on.
line, press the setting to suit your network.
DHCP
– No DHCP server in the network:
– DHCP server in the network:
button.
set up
button.
save
PC software.
seca 115
PC software does not need to be started for this. Only the PC
seca 115
, proceed with step 5.
off
, proceed with step 7.
on
seca 115
PC software
seca 115
PC software)
seca 115
PC software